John Deere 730FD

Number of slats

Six bat poly base, steel tine option

Fingers

Base: nylon
Optional: steel

Diameter

106.7 cm
42 in.

Height control

Hydraulic

Speed control

Hydraulic

Reel lift

Cylinder range: 185 mm
7.3 in.
Total range: 251 mm
9.9 in.

Reel fore and aft

Cylinder range: 359 mm
14.1 in.
Total range: 616 mm
24.3 in.

Reel resume

Base

Reel reverse

Base

Operating speeds

6-70 rpm

Width

Cross belt: 101.6 cm
40 in.
Center belt: 177.8 cm
70 in.

Clean height

Cross belt cleat height: 19.05 mm
0.75 in.

Operating speed

Cross belt: 0 to 228 m/min
0 to 748 fpm
Center belt: 211 m/min
692 fpm

Speed control

Hydraulic from cab (side belts only)

Center belt reverse

Base

Diameter

414 mm
16 in.

Feed drum fingers

Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.

Number of fingers

20

Auger finger platform

Dual chevron, retracting

Finger reach

152 mm
6 in.

Drum/auger reverse

Base

Operating speed

234 rpm

Center clean out door

Base

Type

Electrohydraulic

Header height sensing on the ground

Base

Header height sensing off the ground

Optional: three sensors

Type

Optional: hydraulic drive

Platform length

9.9 m
32.4 ft

Overall operating depth

With dividers: 2.74 m
9 ft

Transport width, field position

10.27 m
33.7 ft

Approximate weight

Dual knife drive: 3,447 kg
7,600 lb